Comet LP040, Инструкция по эксплуатации

Страница: 8 / 39

IE-GPR-LP040-03 8
Connection cable kit LP010 (for data loggers Gxxxx)
The kit is intended for the Gxxxx data logger and the modem interconnection. The kit
consists of two cables: the cable for the data logger and the modem interconnection via
RS232 serial link and the cable for voltage distribution between the data logger and the
modem. Two pieces of contact tubes are also included along with the cable for voltage
distribution.
The data logger
The data logger is a target device. The modem is intended for communication with this
device. Generally, the data logger types Sxxxx, Rxxxx and Gxxxx are supported. A
complete list of the supported devices can be found in the chapter
The list of the
supported data logger types on page 39 .
The paid version of program for data loggers SWR004
This program makes possible to change of modem settings, to communicate with the
data logger, to read information about actual settings and data logger status, to change
parameters for data recording and to read measured data. Minimal program version must
be
2.2.18.0 . The latest program versions are available on www.cometsystem.cz . A GPRS
connection or a setting cable (for example if the GPRS connection is not activated) can
be used for setting of the modem with this program.
The M2MTalk server service
If you want use SMS messages only, you will not have to activate this service. For
anything else (like remote communication with the data logger including data
downloading), this service must be activated. By default, this service is not activated by
manufacturer. In addition, if this service is used,
GPRS must be activated on your SIM
card. Method and amount of payment for this service are determined by valid trading
conditions.
3.2. Additional accessories
The setting cable QMS2901
The cable is intended for setting of the modem with the program for data loggers (from
the computer) via RS232 serial link. It is needed for service purposes only, possibly for
local settings of the modem during its activation, for example if the GPRS connection is
not activated. Using of standard RS232 crossover cable as current computer equipment
is alternative variation. New computers are not equipped with serial COM port
generally. For solution of this problem, the converter MP006 (RS232/USB) is offered. It
is plugged between computer USB port and the setting cable. After installing included
driver, a virtual serial port in the computer is created for communication with the
instrument.