IE-GPR-LP040-03
17
measured values of single quantities and current binary inputs states –
the channel
number or channel description (if it is set) is displayed. If a measured quantity is
assigned to the channel, the measured value and the quantity unit will follow. If a
binary input is assigned to the channel, the user’s description of the current binary
input state will be displayed.
The response message example:
Logger Store_13: Temp1: 24.7C Temp2: 25.0C Bin1: OFF Bin2: ON
If it is not possible to take information about the values, i.e. the data logger is switched off, a
communication error between the modem and the data logger has occurred or detecting of the data
logger type is in progress, the modem will send back a SMS message with a proper error
description.
The command
values
The command for reading of the current values.
An example of the response message
Logger Store_13: Temp: 24.7C Hum: 45.5%RH
DP: 12.1C
The current values from the data
logger Sxxxx or Rxxxx.
Logger Store_13: Temp1: 24.7C Temp2:
25.0C Bin1: OFF Bin2: ON
The current values from the data
logger Gxxxx.
The logger is switched off
A query can’t be processed, because
the data logger is switched off.
An error occurred during communication
with the logger
A query can’t be processed, because
a communication error between the
modem and the data logger has
occurred.
Data logger type detecting is still in
progress, please try it later
A query can’t be processed, because
detecting of the data logger type
is just in progress. It is
necessary to repeat the command
later.
5.1.2. The query about the current values and their alarm settings
To take the current values from the connected data logger and their alarm settings, send the
SMS message
values!
to the modem. The content of the response message is similar to a query
values
. Moreover, if the measured value exceeds any alarm limit or if the binary input is in a state
of active alarm, the symbol „!“ will be displayed in front of the value. This response message also
includes alarm limits for measured values (but not for binary inputs). If a data logger Gxxxx is
connected to the modem, information about adjusted alarm delays in minutes for all measured
values and binary inputs will be displayed too.
The response message example (data logger Sxxxx or Rxxxx):
Logger Store_13: Temp: 24.7C 19.0..26.0 Hum: 45.5%RH 0.0..50.0 DP: !12.1C 0.0..10.0
The response message example (data logger Gxxxx):
Logger Store_13: Temp1: 24.7C 19.0..26.0 1m Temp2: !25.0C 10.0..24.0 2m Bin1: OFF 1m
Bin2: !ON 10m
