IE-GPR-LP040-03
27
The binary input state is equal to the chosen state (data loggers Gxxxx only)
The incoming alarm SMS message
Example 1:
#12345678: #1: 24.7C 19.0..26.0 1m #2:
!25.0C 10.0..24.0 2m #3: OFF 1m #4: !ON
10m
Example 2:
Logger Store_13: Temp1: 24.7C 19.0..26.0
1m Temp2: !25.0C 10.0..24.0 2m Bin1: OFF
1m Bin2: !ON 10m
The current values and their alarm
settings from the data logger.
5.3.2. Other data logger states
Data logger type detection failed
Příchozí zpráva
A problem occurred while detecting a
logger type
The modem is not unable to
determine type of data logger,
which is connected to it. Most
likely, communication between the
data logger and the modem will not
be functioning properly.
Communication error
The incoming alarm SMS message
An error occurred during communication
with the logger
An error occurred while
communication between the modem and
the data logger.
The data logger state (switched on / off, data loggers S/Rxxxx only)
The incoming alarm SMS message
The logger is switched off
The data logger is switched off.
The incoming alarm SMS message
The logger is switched on
The data logger is switched on.
The data logger real time clock error
The incoming alarm SMS message
The logger real time clock error
The data logger real time clock
isn’t adjusted correctly.
The data logger memory is 90% full (data loggers S/Rxxxx only)
The incoming alarm SMS message
The logger memory is 90% full
The data logger memory is 90% full.
