IE-GPR-LP040-03
21
An example of the command with parameters
gprs internet
Setting of the parameter
apn
to the
value
internet
. The values of the
parameters
user
,
password
and
dns
will be deleted.
The response message
GPRS parameters were set and stored
All parameters were set and stored
correctly.
An error occurred while setting GPRS
parameters
An error occurred during setting
the parameters. Their saving didn’t
succeed.
If all values to store are the same as the original already stored values, executing the
command will have no effect. In this case, the modem will only send back the same information as
in the case of
Information about the GPRS connection settings
. So if only the information is sent
back though the user entered the setting command, it means all parameters are already set as
required (it wasn’t needed to change them).
