14
Colortrac SmartLF Ci 24 / Ci 40 Installation and Operating Manual
PAS171 P/N: P005500 Colortrac Ltd © 2010
CHAPTER 3 USING SMARTLF Ci FOR THE FIRST TIME
Documents are loaded LEFT-SIDE justified or CENTER-justified and face-up into the scanner. Look for the yellow
paper symbol.
Colortrac SmartLF Ci is not limited to scanning recognised document sizes, for example A1, A2 and E size. The
maximum scan width for SmartLF is
609.6mm (24”) or 1016mm (40”) but the maximum length is limited only by the
attached computer and scanning software. As soon as the READY status is displayed (after 35 seconds) documents
can be loaded into the scanner.
3.01 Loading a document using the scanner control panel
LOADING A DOCUMENT
Using two hands, place the document on the scanner with the longest edge (if possible) towards the scanner opening.
TAKE CARE TO
LOAD BETWEEN THE SINGLE LINES OR DOCUMENT DAMAGE MAY OCCUR
. The document is
fed promptly into the scanner opening unti
l resistance is met inside the scanner. The document must find its „load
point‟ BEFORE the automatic loading sequence takes over and begins to stage the document. At document stage the
lid display will change to show the word „LOAD‟ as SmartLF Ci completes the document loading process. After
approximately one second the scanner will have staged (re-positioned the document) ready for scanning to
commence. When the scanner is ready to scan the display will change to show the word „Ready‟. Do not try to start a
scan from the software until „READY‟ is displayed.
ASF (AUTO SIZE FINDER)
ASF detects and displays the width of a loaded document as part of the document loading process. It works in
combination with the scanner software.
Configuring ASF
ASF is factory set to off. Use the control panel on the scanner to select mm or inch measurement units or to turn off
this feature. Turning off ASF does not increase document load time.
LEFT: Documents
are loaded into the
scanner face-up
and exit to the front
of the scanner
(cross-section).
RIGHT: Document
being loaded face-
up left-justified into
the Ci.
