Page | 32
VASTRAJET
While cleaning the Press Roller, cover the belt surface with poly sheet to avoid the glue remains falling on
the belt surface.
Fig 32: Wiping Off the Glue from the Press Roller
Step 13:
Leave machine idle for 4 hours to let glue dry and set. (Next glue coat has to be done only after
resting period of 4 hours) Above process has to be repeated for every glue coat process.
Glue Removing Preparation
Prepare and ready the following below mention things before removing glue:
•
Prepare proper ventilators.
•
Wear proper safety armament to prevent from touching glue and cleaner.
•
Put cover sheets on under belt, printer front and rear to protect them from dropped glue and
cleaner.
Note
: Do not use the Belt Washing Unit during the glue coating or glue removing process. Additionally, glue
or the cleaner may damage the brush-roller or sponge roller, thus put a cover on the washing unit.
