Page | 12
VASTRAJET
4. Unloading and Unpacking
Packing Details
VastraJet is shipped in an iron cage and base called
"Pallet "
, wrapped in three layers with antistatic
moisture locked plastic covers. The packing and unpacking dimensions with weight are given as follow:
•
Machine Dimension:
3810 x 1780 x 1640mm
(Length x Width x Height)
•
Packing Dimension:
4005 x 1920 x 1870mm
(Length x Width x Height)
•
Machine Weight
: 1200kg
•
Machine Weight with Packing:
1400kg
The machine is fixed at four corners of the
“
Pallet
”
with a set of four bolts (replacing the leveler fitting
holes), each assuring a firm grip while transporting the machine. Tub along with trolley, supply and take up
pipes, water tank will be enclosed with the machine.
Tool Requirements
The
Tool Requirements
for unloading and unpacking are given as follow:
•
Fork lift
•
Hydra Crane
•
Spanner 10 mm, 17 mm, and 24 mm
•
Wire Cutter
•
Allen key set
•
Door keys
Unloading and Unpacking the Machine
Follow these steps to unload and unpack the machine:
Step 1:
Machine (along with the
“P
allet
”
) should be unloaded from the truck to the levelled and cleaned
surface where it is to be installed.
Note:
Ropes tied with pallet and crane, during unloading, must keep the machine in a perfect balance while
lifting.
Step 2:
Unscrew the 6mm bolts and 10mm nuts from the joints to separate the upper part from the lower
part of the iron pallet and remove the upper cage of the pallet by lifting it with the help of crane.
Note:
If wooden packing, remove all wooden side and top covers.
Step 3:
Unwrap the machine.
