Page | 19
VASTRAJET
Connecting the Power Cable
Precaution:
•
Always earth the outlet.
•
Use the plug adapter that came with the product for the three-pin plug.
•
Never earth with gas or water pipes, or the terminal specifically available for telephone.
•
Handle the power cable and plug with care.
•
Do not use them when foreign objects such as dust are adhered.
•
Make sure to plug-in properly.
•
Do not pull the cable to unplug.
Follow the steps to connect the Power Cable:
Step 1:
Remove the Power Cable that comes with the accessory box of the printer.
Step 2:
Connect the AC adapter to the machine's AC inlet located on the right side at the back of the
machine, as shown below:
Fig 11: Connecting the Power Cable
Step 3:
Connect the power plug into the outlet (If the three-pin outlet is available) as shown in the above
figure.
In case, the three-pin outlet is not available, then follow the instructions given below:
1.
Use the plug adapter that comes with the product.
2.
Attach the adapter to the three-pin plug first, then plug the adapter to the two-pin outlet.
3.
Always earth the outlet with the plug adapter.
