Page | 21
VASTRAJET
Connecting the Printer to PC
Note:
Use USB provided with machine only, don’t use any other USB cable.
To connect the printer to PC, insert one end of the USB cable to the port located at the back of the machine
and other to the pc, as shown below:
Fig 14: Connecting the LAN Cable
Printing Blanket (on Conveyer Belt) Adjustments
Follow the instructions to adjust the belt position:
1.
During printing, belt position has to be monitored time to time. If the belt shifting has crossed 5mm
outside the roller, then print has to be stopped immediately and repositioned the belt in center by
loosening the tensioner screws, as shown below:
Fig 15: Loosing the Tensioner Screws
2.
To control belt shifting, belt tensioner screws should not be disturbed. In such case, the Shifting
Control Slider Block has to be adjusted in the required direction to control belt shifting.
