Installation and assembly
35
Personnel
The installation may only be performed by trained specialist
personnel.
Work on electrical equipment may
only be carried out by qualified electricians.
Personal protective equipment
For all work during installation and start-up, the following personal
protective equipment should be worn:
Industrial safety clothing
Protective gloves
Safety footwear
Eye protection
Securing against switching on
again
DANGER!
Danger of death due to unauthorized power-on!
During installation, there is a danger that the power
supply will be switched on again without
authorization. This causes danger of death for
those in the danger area.
Therefore:
– Before starting work, disconnect all power sup-
plies and secure them against being switched
on again.
6.2 Preparation
Before starting assembly, check:
that the local power supply corresponds to the details on the
identification plate and the specifications in the technical data.
that the installment conditions are complied with
(
Requirements of the installation location).
that the local ambient conditions are complied with
( Operating conditions)
the assignment of responsibilities for installation
and start-up.
that all the necessary documents are available.
the completeness and good condition of all the required tools
and aids.
compliance with local safety regulations