Installation and assembly
34
6 Installation and assembly
6.1 Safety
Basics
WARNING!
Danger of injury due to incorrect installation!
Incorrect installation can cause serious injury or
damage.
Therefore:
– All installation work may only be carried out by
qualified personnel authorized and instructed by
the operator.
– Before starting work, sufficient space for
assembly should be made.
– Pay attention to tidiness and cleanliness at the
assembly site! Loose, stacked or scattered
components and tools are a source of
accidents.
– During assembly:
take care that all components are in the
correct location and are correctly seated.
Install all fixing elements correctly.
Observe the correct screw-tightening torques.
– Before switching on, ensure that all covers and
safety devices are correctly installed and
function correctly.
Electrical equipment
DANGER!
Danger of death due to electrical current!
Contact with live components can cause danger of
death.
Electrically driven components can start to move
without warning and cause extremely serious
injuries.
Therefore:
– Before starting work, disconnect the power -
supply and secure it against being switched on
again.
– All work on the electrical equipment, on
individual electrical components and on the
connections may only be performed by qualified
electricians.