Safety
16
Danger symbols in the operating instruction
In the operating instructions the following symbols are used in
connection with safety information:
Electrical current
DANGER!
Danger of death due to electrical current!
There is direct danger of death on touching live
components.
Damage to the insulation or individual components
may cause danger of death.
Therefore:
– In case of damage to the insulation, switch off
the power supply immediately, and have repairs
carried out.
– Only have work on electrical equipment carried
out by qualified electricians.
– Switch off the power before undertaking any
work on electrical equipment. Check that no
voltage is present!
– Before carrying out regular maintenance,
cleaning and repair work, switch off the power
supply and secure against switching on again.
– Never bypass fuses or put them out of action.
– Observe the correct current rating when
replacing fuses.
– Keep dampness away from live components, as
this may cause short circuits.
Sharp edges and pointed corners
BEWARE!
Danger of injury on edges and corners!
Sharp edges and pointed corners can cause cuts
and grazes to the skin.
Therefore:
– Always take care when working near sharp
edges and pointed corners.
– Wear gloves in case of doubt.