background image

16

4.3 

Methods

Touch 

 to access methods that have been saved. Touch the required method to view the details of the

method set up. You will then be able to delete, upload, export, edit or run the selected method. See section 11 for
more information.

4.4 

Results

Touch 

 to access results that have been saved. Touch the required results to view the details of the

result. You will then be able to delete, upload or export the selected result. See section 11 for more information.

4.5 

Settings

Touch 

 to enable access to instrument status, measurement settings, network connections, storage

and service settings.

4.5.1 

Instrument Status

Touch 

  to  view  the  status  of  the  spectrophotometer,  check  connections,  fitted  accessories,

the serial number of the unit and the software version the instrument is using. The language and date and time
can also be set here.

4.5.1.1  Instrument Language

The  software  can  be  viewed  in  five  different  languages  with  a  choice  of  English,  French,  German,  Spanish  or

Italian. To select the required language touch 

 and select from the menu. Touch 

 next to the

required language to apply.

Содержание Jenway 7410





































































Отзывы: