91
468
260
V
01 10/2013
For your safety
GB
• Dispose of any remaining fuel in an appropriate manner. Never dispose of fuel with regular
household waste.
• Fuels may be stored only for a limited time. Never buy more fuel than you plan on consuming
within the next few months.
Maintenance
• Before conducting any maintenance on the device, always set the ignition switch to [0] and pull
the ignition cable plug.
• Check the fuel system regularly for leaks or defective parts.
• Only those maintenance and fault elimination tasks described here may be carried out. Any
other tasks must be completed by a specialist.
• Only use original replacement parts. Only these replacement parts are designed and suitable
for the device. Other replacement parts will not only lead to an invalidation of the warranty, they
may also endanger you and your environment.
Device-specific safety instructions
• Young people under 18 years of age and users who are not sufficiently acquainted with its oper-
ation must not use the device
• Make sure that the device is assembled completely and according to regulations.
• Check the device to ensure that it works correctly, especially check the correct and secure fit of
the chain rail, saw chain tensioned according to regulations and correct function of the chain
brake.
• Check all screw connections regularly to ensure tight fit.
• Before use, ensure that there are no people or animals in the work area.
• Make certain that the work area is free of obstacles.
• Always keep an eye on your surroundings in order to ensure that you are not endangering any
people or animals with your work.
• No other persons or animals may be present within an area of 15 m around the cutting area, as
they may otherwise by hit by objects being slung away.
• Never work in poor light or weather conditions.
• Only saw wood. Do not use the chain saw for work for which it is not intended.
• Keep the handles dry, clean and free of oil and grease. Greasy, oily handles are slippery and
cause loss of control.
• Avoid sawing in bushes, since here small branches may get caught in the saw chain and they
can fly out uncontrolled.
• Make sure that you can stand firmly and safely in each work position. When working on a slop-
ing subsurface, be especially careful!
• Always hold the device firmly in both hands. Use your right hand to grip the rear handle, your
left hand to grip the other handle, even if you are left-handed. Do not let go of the handles!
• When the saw is running, keep all body parts away from the saw chain. Make sure before start-
ing the saw that the saw chain does not touch anything.
• Never saw above shoulder height! Do not lean forward or back!
• Always ensure that you are standing firmly and only use the chain saw when you are standing
on stable, firm and level ground. A slippery subsurface or instable standing area such as on a
ladder can cause you to lose your balance or lose control over the chain saw.
Kettensaege_Benzin_468260_468261.book Seite 91 Montag, 7. Oktober 2013 11:09 11
