Club Car Carryall XRT 1550, Руководство по техническому обслуживанию и ремонту

Страница: 259 / 432

ELECTRICAL COMPONENTS: DIESEL VEHICLES Front Differential Limit Switch
14
2. Place the Forward/Reverse handle in the REVERSE position.
3. Tighten the limit switch mounting screws so that they are snug, but the limit switch can still be rotated in the
adjustment slot
(Figure 14-8, Page 14-12) .
4. Rotate the limit switch so that the lobe on the Forward/Reverse handle activates the limit switch as shown
(Figure 14-9, Page 14-12) .
5. Hold the limit switch in position and tighten the mounting screws and nuts to 4 in-lb (0.5 N·m). See following
CAUTION.
CAUTION
• Do not overtighten the retaining nuts. If the nuts are overtightened, the limit switch could become
damaged.
6. Place the Forward/Reverse handle in NEUTRAL and then back to REVERSE to ensure that the limit switch
lever is being properly activated.
7. Connect the 18-gauge red and 18-gauge red/white wires to the limit switch.
8. Lower and secure the hood.
9. Connect battery. See Connecting the Battery – Gasoline/Diesel Vehicles, Section 1, Page 1-4.
10. Turn the key switch to the ON position. With the Forward/Reverse handle in REVERSE, the buzzer should sound.
FRONT DIFFERENTIAL LIMIT SWITCH
See General Warnings, Section 1, Page 1-2.
TESTING THE FRONT DIFFERENTIAL LIMIT SWITCH
See Test Procedure 19 – Front Differential Limit Switch on page 12-29.
FRONT DIFFERENTIAL LIMIT SWITCH REMOVAL
1. Disconnect battery. See Disconnecting the Battery – Gasoline/Diesel Vehicles, Section 1, Page 1-3.
2. Locate front differential limit switch above accelerator pedal.
3. Disconnect wire leads of switch (1) from wire harness (Figure 14-10, Page 14-14) .
4. Remove the nuts (2) and screws (3) that secure the switch (1) and remove the switch.
2013 Carryall 295/XRT 1550 Maintenance and Service Manual Page 14-13