Club Car Carryall XRT 1550, Руководство по техническому обслуживанию и ремонту

Страница: 356 / 432

17
Transmission DRIVETRAIN COMPONENTS
2
4
#
L
E
D
O
M
2209
Figure 17-15 Lubrication Fill Plug and Vent Tube
14. Attach vent tube and check lubricant level of transmission (Figure 17-15, Page 17-12) . See Periodic
Maintenance, Section 10, Page 10-1.
15. Tighten wheel lug nuts to 85 ft-lb (115 N·m).
16. Gasoline vehicles: Connect the spark plug wires.
17. Connect battery. See Connecting the Battery – Gasoline/Diesel Vehicles, Section 1, Page 1-4.
FORWARD/REVERSE SHIFTER CABLE
See General Warnings, Section 1, Page 1-2.
Forward/Reverse Shifter Cable Removal
NOTE: Before the Forward/Reverse cable is removed, note the cable routing and the wire tie positions and the
positions of other devices securing the cable to the vehicle. When installed, the cable must be routed and
secured as it was originally.
1. Disconnect battery and spark plug wire(s) (gasoline vehicles only) . See Disconnecting the Battery –
Gasoline/Diesel Vehicles, Section 1, Page 1-3.
2. Raise the hood.
3. Disconnect cable end from Forward/Reverse shifter handle in the dash by removing clip (Figure 17-16, Page
17-13) .
4. Loosen the flanged nuts on the cable at the shifter handle bracket (Figure 17-16, Page 17-13) .
NOTE: Note the positions of the flanged nuts on the cable. The nut farthest from the handle should be at the farthest
end of the threaded portion of the cable.
5. Remove seat.
6. Note the positions of the wire ties that secure the cable between the dash and the transmission and then remove
the wire ties.
7. Disconnect cable end from transmission shifter arm by removing clip (Figure 17-16, Page 17-13)
8. Loosen the flanged nuts from the cable bracket that is below and forward of the transmission shifter arm (Figure
17-16, Page 17-13) . See following NOTE.
Page 17-12 2013 Carryall 295/XRT 1550 Maintenance and Service Manual