Club Car Carryall 300 2021, Руководство по техническому обслуживанию и ремонту

Страница: 483 / 596

12
Specifi cations
KohlerEngines.com 17 690 15 Rev. --
TORQUE SPECIFICATIONS 4,7 ECH440 for Club Car
Throttle Body
Studs 10 N·m (89 in. lb.)
Primary Mounting Nuts 8.0 N·m (71 in. lb.)
Temperature/Manifold Absolute Pressure (TMAP)
Sensor Fastener 7.3 N·m (65 in. lb.)
Throttle Position Sensor (TPS) Fastener 1.3 N·m (11.5 in. lb.)
Throttle Lever Fastener 1.3 N·m (11.5 in. lb.)
Fuel Injector Cap Fastener 7.3 N·m (65 in. lb.)
Valve Cover
Fastener 10 N·m (89 in. lb.)
CLEARANCE SPECIFICATIONS
4
ECH440 for Club Car
Camshaft
Running Clearance 0.016/0.052 mm (0.0006/0.0020 in.)
Bore I.D.
New 16.000/16.018 mm (0.6299/0.6306 in.)
Max. Wear Limit 16.068 mm (0.6326 in.)
Camshaft Bearing Surface O.D.
New 15.975 mm (0.6289 in.)
Max. Wear Limit 15.90 mm (0.626 in.)
Cam Lobe Profi le (minimum dimension, measured from
base circle to top of lobe)
Intake - New 32.286 mm (1.271 in.)
Max. Wear Limit 32.032 mm (1.261 in.)
Exhaust - New 32.506 mm (1.280 in.)
Max. Wear Limit 32.252 mm (1.270 in.)
Connecting Rod
Crankpin End I.D. @ 21°C (70°F)
New 37.020/37.030 mm (1.4575/1.4579 in.)
Max. Wear Limit 37.08 mm (1.460 in.)
Connecting Rod-to-Crankpin Side Clearance
New 0.56 mm (0.022 in.)
Max. Wear Limit 1.06 mm (0.042 in.)
Connecting Rod-to-Piston Pin Running Clearance 0.008/0.025 mm (0.0003/0.0010 in.)
Piston Pin End I.D. @ 21°C (70°F)
New 20.006/20.017 mm (0.7876/0.7881 in.)
Max. Wear Limit 20.03 mm (0.789 in.)
4
Values are in Metric units. Values in parentheses are English equivalents.
7
Lubricate threads with engine oil prior to assembly.