Club Car 2005 Precedent, Техническое обслуживание и сервис

Страница: 65 / 212

STEERING AND FRONT SUSPENSION Rack and Pinion
2005 Precedent IQ System Electric Golf Car Maintenance and Service Manual Page 7-7
7
Rack and Pinion Disassembly, Continued:
10. If the ball bearing (4) (Figure 7-5, Page 7-6) has been damaged, remove the C-type stop ring (16)
(Figure 7-7, Page 7-7) and press the bearing off (Figure 7-9, Page 7-7) .
11. Inspect the bushing (7) and needle bearing (6) for excessive wear. If wear is excessive, replace the entire
assembly (Figure 7-5, Page 7-6) .
12. Inspect the ball joints (8) for wear. If one or both of the ball joints (8) are excessively worn, remove and
replace the ball joint from the rack (18).
13. Remove the rack (18) from housing (17).
Figure 7-6 Remove Dust Seal Figure 7-7 Pinion Snap Rings
Figure 7-8 Remove Pinion from Housing Figure 7-9 Remove Bearing from Pinion
4
16
PRESS RAM
PINION GEAR
BEARING