Cloos NexT 452 AC, Руководство по эксплуатации

Страница: 203 / 234

203
No. Error message on the display Possible cause Remedy
582 BMP - 64KB exceeded
Overall size of logos stored in
the operating module exceeded.
(MasterPlus)
Delete image file for logo in the
operating module.
583 SD Error
Limit value exceeded/not
reached triggering a collective
fault SD.

Check SD logbook
600 Emergency stop
Master controller has triggered a
signal.
601 Safety stop
Master controller has triggered a
signal.
610 Error 24V outputs
24V for peripheral interface (X70)
and reserve output 3 (A9-X16)

Service
611 Error 24V outputs
24V collective fault (A9-X16) and
Arc_on signal (X70)
 Service
613 Error 24V outputs 24V RPU (X30) and VBC (A9-X23)

Service
614 Error 24V outputs
24V signal enable PCU (A8-X9)
and 24V RC (A9-X24)
 Service
615 Error 24V outputs 24V robot interface (A9-X21)

Service
620 Internal USB stick not found Data carrier missing/faulty
Check data carrier
Insert data carrier again

Service
621
Internal USB stick is write-
protected
Data carrier faulty
Check data carrier
Insert data carrier again

Service
622 Internal USB stick is full Not enough free storage space.

Replace data carrier
 Service
650 Cooling module failed
Connection to the module
interrupted during operation.
 Switch machine Off and On
 Check plug and connections
 Service
651
Software version cooling
module out-of-date
Software update required
 Software update
 Service
652
Cooling module - fan excess
temperature Overheating of the module,
Device dirty
 Let the machine cool down
 Check filter mats and change if
necessary
 Clean machine with dry air
 Clean heat sink
 Check sensors (service)
653
Cooling module - pump
excess temperature Overheating of the module
Device dirty
 Service
654
Undervoltage cooling
module !
Input voltage outside the
permissible value range of
360 V...440 V

Check input voltage

Replace cooling module
 Service