Cloos NexT 452 AC, Руководство по эксплуатации

Страница: 145 / 234

145
5.10.2.1 Creating/editing/deleting a user profile
If a user is assigned a user profile, only the functions activated for him can
be called up at the welding power source.
Log in to the welding power source with the access level "Configurator" to
change user profiles.
Creating/editing a user profile
Proceed as follows to open the user management:
1. Press the "Hold" and "Key" buttons simultaneously until the
configuration menu appears.
2. Select and confirm the menu "User management" using the rotary
knob.
3. Open the submenu "Overview".
4. Select and confirm an empty field using the rotary knob.
• A submenu appears.
5. Select "Edit" in the submenu.
• A new menu opens.
A user profile consists of:
• a six-digit password
• a user name with a maximum of 30 characters
• an allowed job range of at least 1 to max. 994 jobs
• a defined operating level
6. Give the user profile a name.
7. Specify a password.
The password must be unique. It must not be used for another user profile
at the same time.
8. Define the allowed job range.
When defining a job range, pay attention that the job range enable in the
higher level menu is set to "Allowed jobs".
9. Select an operating level.
Three operating levels are available:
Abbrevia-
tion
Operating level Rights
K Configurator
The user has unrestricted access rights to all
menus and functions.
P Programmer
The user must not make any configuration
in the system. He may call and save all jobs.
He must not change any welding parameter
setting ranges.
A Automatic
The functions of the "Automatic" operating
level depend on the settings in the menu
"Options", see Page 144.
10. Save the settings.
11. Close the menu.
• The new user profile appears in the overview.
INFO!
INFO!
INFO!
INFO!