Cloos NexT 452 AC, Руководство по эксплуатации

Страница: 199 / 234

199
No. Error message on the display Possible cause Remedy
265
CDD4 Desired rotation speed
not reached
Preset rotation speed not
reached. Encoder signals faulty
motor movement.
 Check motor movement
 Check CDD
 Check wire feed distance
 Check CDD cable connections
 Check encoder
 Fuse 42V supply faulty
 Power supply board
 Service
266
System - External RAM
memory error RAM chip on control board
missing or faulty.

Service
267 Invalid job number Invalid job number requested.

Repeat operation
 Service
268 Job not available
A non-existent job has been
called up.
 Check available jobs

Service
269 Timeout during data transfer Error in data transfer.

Check data carrier

Check plug and connections
 Service
270
Checksum error during data
transfer
Error in data transfer.
 Check data carrier
 Check plug and connections
 Service
271 Wrong file version
File version cannot be processed
by current software.
 Check software versions when
transferring data from one machine to
the other
 Software update may be required
 Service
272 Error in file format Faulty file

Use correct file format
 Service
274 QWD1- Overcurrent
Overload results in increased
current load of the drive unit.

Check wire feed distance
 Service
275 QWD2- Overcurrent
Overload results in increased
current load of the drive unit.
 Check wire feed distance

Service
276 QWD3- Overcurrent
Overload results in increased
current load of the drive unit.

Check wire feed distance
 Service
277 QWD4- Overcurrent
Overload results in increased
current load of the drive unit.
 Check wire feed distance

Service
278 CDD1- Overcurrent
Overload results in increased
current load of the drive unit.
 Check wire feed distance
 Service
279 CDD2- Overcurrent
Overload results in increased
current load of the drive unit.
 Check wire feed distance
 Service
280 CDD3- Overcurrent
Overload results in increased
current load of the drive unit.
 Check wire feed distance

Service
281 CDD4- Overcurrent
Overload results in increased
current load of the drive unit.

Check wire feed distance
 Service
282
Tandem software version
Slave out-of-date
Software version not compatible.
 Synchronise software

Service