Cloos NexT 452 AC, Руководство по эксплуатации

Страница: 118 / 234

118
Description of the additional functions
3.4 Functions - System logbook
If a USB stick is plugged into the control board of the welding power
source, the welding power source stores all system messages on it. System
messages can be error entries (water monitoring, temperature error etc.)
or documentation entries (user registration, save/delete job etc.).
The menu shows all existing entries in chronological order.
An entry contains the following information:
• Timestamp
The time stamp of the logbook entry. At this time the welding power
source saved the entry in the logbook.
• User
The user who was active when the entry was saved.
• Error no. / Docu no.
For an error entry, the error number and for a documentation entry, the
documentation number that identifies the entry.
• Error text / Docu text
The text belonging to the respective error number / documentation
number.
• Information
An additional information according to entry.
The logbooks must be copied and deleted from the USB stick at regular
intervals, as the storage space is limited. Using the QDM software there are
two options: Via the backup functions or the management functions.
The system logbooks are allocated to a certain welding power source but
this allocation cannot be seen in the logbooks. It is important that this
allocation is not lost when the logbooks are archived or are copied again
later into the data management of the application.
3.5 Functions - Diagnostics
3.5.1 Diagnostics - Software versions
The machine model, performance class, the MAC address, data set number,
the current version of the selected synergy characteristic curve, the current
version of the activated language and the software versions of the modules
connected to the CAN bus are displayed in this menu.
The "Data set number" identifies the entire characteristic curve data set.
The "Characteristic curve number" identifies the current characteristic
curve.
3.5.2 Diagnostics - Power unit
This menu contains status information of modules connected to the power
unit.
3.5.2.1 Diagnostics - Power unit - Mains supply
This menu shows the values currently measured in the welding power
source of the connected mains supply.
INFO!