CLIVET WSAT-YES FC, Руководство пользователя, Страница: 7 / 86

water leaks, electric shock, fire or the unit falling from its
support.
 Install the unit on a structure that can withstand its weight. An
insufficiently robust structure may lead to the unit falling
causing possible lesions.
 Perform installation operations considering the possibility that
strong winds, hurricanes or earthquakes may occur. Incorrect
installation operations may lead to accidents caused by falling
equipment.

Make sure all electrical operations are performed by qualified
personnel in accordance with the law, local regulations and
this manual.
 Connect the unit to a separate power supply circuit. An
insufficient capacity of the power supply circuit or incorrect
connections may lead to electric shock or fire.
 Make sure to install an additional differential circuit-breaker
against a leakage to earth compliant with the law and local
regulations: omnipolar circuit breaker, at least 3 mm
separation in all poles, residual current device (RCD) with a
rated value not exceeding 30 mA.
 Failing to install a differential circuit-breaker may lead to
electric shock and fire.
 Make sure all the wiring is safe. Use the specified wires and
make sure terminal connections and wires are protected
against the water, external forces or other phenomena.
Incomplete connections or fixing may cause a fire.
 When connecting the power supply, arrange the wires so that
the front panel can be fixed properly. If the front panel is not
in position, it may lead to terminals overheating, electric shock
or fire.
 People working or intervening on a cooling circuit must hold a
suitable certification issued by an authorised assessment
centre proving their suitability to handle refrigerants safely in
compliance with a specific assessment recognised by industry
associations.
 After installation operations are over, verify that there are no
refrigerant leaks.
 Never touch the leaking refrigerant directly, as it may lead to
serious frostbite injuries. Do not touch the refrigerant pipes
during and right after functioning, as they may be hot or cold
depending on the conditions of the refrigerant flowing through
the pipes, compressor and other parts of the cooling circuit.
Burns or frostbite may occur if you touch the refrigerant
pipes. If it is necessary to touch the pipes, wait for them to
return to a normal temperature or wear protective gloves and
clothes.
 Do not touch the internal parts (pump, backup heater, etc.)
during and immediately after functioning. Touching internal
parts may cause burns. To avoid lesions, wait until the
internal parts have returned to a normal temperature or, if
touching them is necessary, wear protective gloves.
 Do not use other means than those recommended by the
manufacturer to hasten the defrosting or cleaning process.
 The equipment must be placed somewhere without continuous
ignition sources (e.g. open flame, a gas-operated device or an
electric heater).
 Do not pierce nor burn.
Avvertimento:
Rischio di incendio
Materiali infiammabili