CLIVET WSAT-YES FC, Руководство пользователя, Страница: 16 / 86

6 SELECTING THE INSTALLATION SITE
Positioning
 Installation must be in accordance with local regulations. If
they do not exist, follow EN378 .
During positioning consider these elements:

customer approval
 unit weight and bearing point capacity

safe accessible position
 functional spaces

spaces for the air intake/exhaust
 electrical connections

max. distance allowed by the electrical connections
 water connections
Functional spaces
Functional spaces are designed to:
 guarantee good unit operation

carry out maintenance operations
 protect authorized operators and exposed people
 Respect all functional spaces indicated in the TECHNICAL
INFORMATION section.
Positioning
Units are designed to be installed:
 EXTERNAL

in fixed positions
 Put the unit in a position where any leaking gas cannot enter
buildings or stagnate in closed areas. In the latter case,
observe the rules for machinery rooms (ventilation, leak
detection, etc.).
Installation standards:

install the unit raised from the ground
 bearing points aligned and leveled
 discharged condensation water must not cause harm/danger
to people and property
 the accumulation of snow must not cause clogging of the
coils

avoid installations in places subject to flooding
Limit vibration transmission:

use anti-vibration devices or neoprene strips on the unit
support points

install flexible joints on the hydraulic connections
Protect the unit with suitable fence in order to avoid access to
unauthorised personnel (children, vandals, etc.)
A correct circulation of the air is mandatory to guarantee the
good unit operating..
The unit must be level.