Proprietary Information: Not for use or disclosure except by written agreement with Clearfield.
54
FieldSmart
®
Fiber Active Cabinet (FAC) 3200
Installation Manual
_________________________________________________________
Lift up on the wind brace arm to disengage it.
Swing the door closed.
Insert the telco hex key into the door’s upper latch.
While holding the door firmly closed, turn the key clockwise to engage the latch.
Repeat Steps 3 and 4 to engage the lower latch.
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
To close a cabinet door
Open the front cabinet door (above the battery compartment door).
Using a 7/16-inch nut driver, remove the two bolts at the top of the battery compartment door. Set aside the
bolts to later re-attach the door.
Tilt and pull the door panel forward, away from the cabinet.
To completely remove the door, disconnect the ground strap using a 3/8-inch hex nut driver.
Step 1:
Step 2:
Step 3:
Step 4:
To open a battery compartment door
The cabinet’s battery compartment is equipped with a removable access door. The battery compartment door is secured
at the top by two 7/16-inch hex bolts that are accessible only when the cabinet door above it is open, thus preventing
unauthorized access.
If detached, re-attach the ground strap to the battery compartment door using a 3/8-inch hex nut driver.
Insert the tabs on the bottom of the door into the notches at the base of the compartment, then tilt and push the
door panel closed. Some force may be required.
Insert the two bolts (removed previously) through the matching holes in the door and cabinet and tighten using
a 7/16-inch nut driver.
Step 1:
Step 2:
Step 3:
To close a battery compartment door
Battery Compartment Door
