Claydon HYBRID M3, Руководство оператора

Страница: 54 / 66

H
IN FIELD OPERATION
54 OPERATORS MANUAL - HYBRID - M3, M4, M4R, M4.8 & M6
Enter the weight from the scales
(Step 5). Press
Note: When entering
the weight data it is
recommended to use all 3
decimal places for input after
the decimal point if possible. If
the weighing scales only use 2
decimal places this will suffice.
After pressing ‘OK’ this screen
should appear. It shows the Error
percentage between calculated,
Cal factor and actual Cal factor.
(Kg/ Rev) Press ‘OK’ the drill
is now calibrated. On the first
calibration this percentage can
be quite large. This is why it is
important to calibrate the machine
at least three times . At the end
of the third time the percentage
should be no more than
1%.
Follow steps 4 - 8 a further
2 - 3 times to gain an accurate
calibration setting on the drill.
When finished stow scales safely
away, fit venturi elbow and replace
securely with bracket.
Step 7
Step 8
Step 9