Claydon HYBRID M3, Руководство оператора

Страница: 39 / 66

39
H
IN FIELD OPERATION
OPERATORS MANUAL - HYBRID - M3, M4, M4R, M4.8 & M6
PRE-EMERGENCE MARKERS
Depending on your machines specifications pre-emergence markers may be fitted to your machine. This
optional extra allows tramline marks to be made visible behind the drill, therefore making it easier to apply
pre-emergence sprays. Images of the markers can be seen below.
1. Left hand pre-emergence marker
2. Right hand pre-emergence marker
The pre-emergence markers will be activated when the target tramline bout number is reached. If the
markers are not leaving enough of a visible mark during use then the aggressiveness of them can be altered.
This is achieved by slackening the retaining bolts and turning the stub axle to increase aggressiveness.
1. Slacken bolts to alter
marker
2. Marker stub axle
Once the points have become worn it may be advisable to extend the marker points using the extra holes.
This is accomplished by removing the two bolts, sliding the point further down the tine and reinserting the
bolts. This will ensure a clear mark is left behind the drill.
1. Bolts to remove in
order to extend
point
2. Marker point
1.
2.
1.
1.
1.
2.
2.
1.
1.
2.