<SM-431049>
− 9 −
※Regenerative current can cause product malfunction and breakdown.
２）
Do not bang piston rod or table onto the mechanical stopper except when returning to its original
position or for clamping operation.
※Impact can damage the feed screw and it may cause the product to malfunction.
３）
Do not dent nor scratch the moving part.
※Doing so may cause the product to malfunction.
４）
For push/clamp movements, set the press-in distance so that the movements start 0.5 mm or more
ahead of the actual push/clamp starting position.
※If the work piece is pressed-in at a position where push/clamp movements have not started, it will
trigger an alarm.
５）
Durability varies by transfer load, environment, etc. Allow sufficient margin when setting transfer load
and such. Take measures so that there is no impact to the moving part.
※Otherwise, it will greatly reduce service life.
６）
Before supplying power to the product, always confirm safety of its operating range. Immediately turn
off the power if LED of the product does not flash after turning the power on.
※Carelessly supplying power to the product may lead to electric shock and injury.
７）
Do not touch or come in contact with the product body during operation and immediately after
stopping.
※Doing so may result in burns.
８）
Do not get on nor place objects on the product.
※Doing so may cause falls, product turnover, injury due to drops, product breakdown, product
malfunction from damage, and so on.
９）
Take measures that will prevent damage to human body and equipment in case of power line failure.
※Doing so may cause unexpected accidents
１０）
Stay off of the product operating range when the product is in an operable condition.
※The product can make a sudden move and it may lead to injury.
１１）
ELCR (table type) may catch a finger or such in between the motor case and the table when
returning to origin. Pay extra attention.
１２）
If ELCR-28 is being used with a cylinder switch attached, use the teaching pendant to move the
table to the PUSH side before attaching the cylinder switch. Forcedly moving the table can cause
injury and product failure.
１３）
Do not allow external force to act on the product during return-to-origin movement.
※Otherwise, it may falsely recognize its origin.
１４）
The product must be fitted with a LAN port protective cover (for connecting the teaching pendant)
during operation.
※Otherwise, foreign substance can get in the product and cause product failure.
２．４ Disposal
When disposing this product, follow the law on Waste Disposal and Cleaning, and make sure to have it
disposed of by a specialized waste disposer
Содержание ELCR Series
Страница 56: ...MEMO...
