CKD AX0180, Инструкция по эксплуатации

Страница: 9 / 103

[SMB-66E]
－
1
－
PRODUCT
1
1. TOPICS RELATED TO PRODUCT
1.1 Feature
1) Creation of equal segment programs is made easy.
You can handle operations ranging from creation of equal segment programs up to actuator
control even if you are a novice about NC codes and operation codes. Equal segment programs
can be created through interactive operation.
2) No need for special power supply
The power is supplied from ABSODEX.
3) Program and parameter backing
Capacitors are used to back the memory. Programs and parameters are retained for three hours
after the power is turned off.
This feature is useful when the program is copied to another ABSODEX unit.
The program memory capacity is 16K bytes.
4) Five operation modes
a) Edit mode
Through interactive operation, you can edit the program for performing equal segment actions.
In addition, you can use NC codes to edit the program.
Only one editing program is stored. (Memory backup time: 3 hours)
Up to 2000 characters can be entered in the program.
Nine sample programs are registered, and you can edit the desired sample program to create
the desired program.
b) Display mode
The input/output statuses of input/output signals at CN3 of the ABSODEX driver are displayed
as well as the current actuator position, alarm state, etc.
c) Parameter mode
Parameters can be monitored or entered.
With serial communication interface TS/TH-type drivers, relevant settings such as the station
number and baud rate can be configured.
d) Motion mode
Program starting/stopping and number selection, resetting, single block operation, MDI
operation, brake application/release, offset value entry, communication through terminal
inputs, and home return can be conducted.
e) Copy mode
All programs and parameters can be copied from ABSODEX driver to another driver.
f) Tuning mode (function for TS-type driver only)
ABSODEX is adjusted using the auto tuning function of ABSODEX.
5) Simple operation
Hold in the left hand and use the thumb of the left hand to operate the
SHIFT
key while entering
number and letter keys with the right hand.
6) Simple program change
The angle and speed in the program can be modified without difficulty in the edit mode.
7) Comprehensive communication functions
Note: The program capacity and directory display are limited.
8) stop function