CKD AX0180, Инструкция по эксплуатации

Страница: 18 / 103

[SMB-66E]
－
10
－
OPERATION
2
3) Enter the program number to be created (0 to 999),
and press the key.
4) The NC program entry screen is displayed.
Enter the NC program.
※ ※ ※ ※
For the NC codes, refer to Section 3.3 "Code
List."
2.4.2.1 Key operation for NC program entry
・
SP ;
key
Enter ";" at the end of a block to feed a line and
move the cursor to the next block.
・
key
The
cursor
moves to the previous block.
・
key
The cursor
moves
to the next block.
※ ※ ※ ※
The cursor does not move if ";" is missing
at the end of the current block.
・
DEL
key
One
character
at the cursor is deleted.
※ ※ ※ ※
Single block delete
Move the cursor to the "N" position at the
start of the block, and press the
DEL
key
to delete the block (line).
・
key
Press to
exit
from program entry.
The
editing
process is terminated and "5
STORE" in the edit mode menu starts.
※ ※ ※ ※
Refer to Section 2.4.5 "Procedure for storing the editing program to the ABSODEX
driver."
・
MODE
key
Press to interrupt
program
entry.
The editing process is interrupted and "4
CNT" in the edit mode menu starts.
※
※ ※
※
Refer to Section 2.4.4 "Program editing continuation procedure."
ＮＣ ＰＲＧＭ： ＮＥＷ
ＰＲＧＭ ＮＯ． ［ ］
ＮＣ ＰＲＧＭ Ｏ１
SP ;
ＮＣ ＰＲＧＭ Ｏ１
Ｎ１Ｇ９０Ｇ１０５Ｇ１１
Ｎ１Ｇ９０Ｇ１０５Ｇ１１；
ＮＣ ＰＲＧＭ Ｏ１
Ｎ１Ｇ９０Ｇ１０５Ｇ１１；
Ｎ１Ｇ９０Ｇ１０５Ｇ１１；
ＥＤＩＴ ＭＯＤＥ
←３ＲＥＡＤ ４ＣＮＴ →
★
To delete the N2 block
DEL
Ｎ１Ｇ９０Ｇ１０５Ｇ１１；
Ｎ２Ａ１８０Ｆ１．５；
Ｎ１Ｇ９０Ｇ１０５Ｇ１１；
Ｎ３Ａ９０；
ＥＤＩＴ ＭＯＤＥ
←４ＣＮＴ ５ＳＴＯＲＥ→