CKD AX0180, Инструкция по эксплуатации

Страница: 4 / 103

z
The product is supplied for use by the persons who have
proper expertise in electrical or mechanical engineering.
CKD will not be liable for bodily injuries or accident caused
by the use by the people who has no or little knowledge in
electrical and mechanical fields, and by the people who is
not thoroughly trained for using ABSODEX.
z
Connect Teaching Pendant to CN1 of ABSODEX Driver
before turning the power on.
z
After connecting the CN1 terminal, tighten the screws
without fail to lock the connector.
If the connector is disconnected or ABSODEX is turned off
during program transmission, program failures and/or
malfunction will be caused.
z
Connect Teaching Pendant with the driver only when it is
used. Leave it unconnected when it is not used.
z
Do not give a large pressure or impact on the machine.
Otherwise failure will be caused.
z
Do not press the displaying unit forcibly.
z
Keep the product at a place where the temperature is low
and humidity is less with no direct sunshine.
z
This Teaching Pendant is for the TS, TH, GS, S, GH and H
type ABSODEX Drivers.
Some functions are unavailable if it is used for the C type
or earlier type drivers.
z
Some communication codes are not supported with some
versions of ABSODEX Driver.
z
Teaching Pendant, driver and actuator (except for AX8000
Series) are not water or oil proof.
Take measures against water and oil when using it in an
environment susceptible to water or oil splashes.
z
External noise may distort the display. Please restart the
control power if the display becomes distorted.
CAUTION:
！