manualshive.com logo in svg

CITROEN Berlingo 2003, Руководство пользователя

Поделиться
Скачать
CITROEN Berlingo 2003 Скачать руководство пользователя страница 413

409

BRAKES

CHECKS AND ADJUSTMENTS : BRAKE COMPENSATOR (continued)

XSARA - All Types

B3FP101C

TOOLS

- Braking pressure checking tool                          : 

4140-T.

CHECKING THE BRAKE PRESSURE

WARNING : Do not touch the plastic nut (1).

PRELIMINARY OPERATIONS

- Place the vehicle on a 

4-column lift

if possible.

- Fit tool 

4140-T

.

- Calculate the rear vehicle weight (see tables on preceding pages). - Check that no hydraulic fluid is leaking and
that the pipes are not obstructed.
- Refer to the graph which corresponds to the vehicle type (see preceding pages).

CHECKS

- Perform the checks between the wheels as follows : front left and rear right - front right and rear left.
- With the engine running, increase the pressure at the rear to obtain a front pressure of 

60 Bars

.

ESSENTIAL : The checking pressure must be obtained by progressively increasing the pressure (never
reduce the pressure to adjust it).

- Check the increased measurement against the graph. (If the measurement is not within the limits, adjust the
compensator) (see following page).
- To check that the compensator works correctly, increase the rear pressure to 

100 bars

. (If the measurement is not

within the limits, replace the compensator).
- Bleed the brake system and carry out a road test.

Содержание Berlingo 2003



































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды