CITROEN Berlingo 2003, Руководство пользователя

Страница: 165 / 482

ENGINE
161
CHECKING AND SETTING THE VALVE TIMING
Engines : 8HY - 8HV
B1EP18XC
Setting the timing (continued).
Checks (continued).
Reposition the timing belt, belt at «e» well tensioned, in the following order:
- Guide roller
(17) .
- Camshaft pulley (16) .
- Fuel high pressure pump pulley (15) .
- Coolant pump pinion (18) .
- Tensioner roller (19) .
Remove the 5 mm diameter peg at «d» .
Adjusting the fitting tension of the belt.
Action the tensioner roller (19) to align the marks «f» and «g» , avoiding detensioning the timing belt,
with the aid of a male hexagonal spanner, at «c» .
If this is not successful, repeat the operation to tension the belt.
Hold the tensioner roller in position
(19) .
Tighten the tensioner roller, tightening to 3,7 ± 0,3 m.daN .
Check the position of the tensioner roller (the alignment of the marks «f» and «g» should be correct).
Remove tools [2] and [3] .
Turn the crankshaft six rotations (clockwise).
C3