manualshive.com logo in svg

CITROEN Berlingo 2003, Руководство пользователя

Поделиться
Скачать
CITROEN Berlingo 2003 Скачать руководство пользователя страница 301

297

CLUTCH

GEARBOX

DRIVESHAFTS

BE4/5 GEARBOX - CHECKS AND ADJUSTMENTS

TOOLS.

[1] 

Tool for positioning the gear lever

: 9607-T.

ADJUSTMENTS.

WARNING : Cables should be adjusted each time
the gearbox, gear controls or power unit are
removed.

Inside the vehicle.

- Remove the trim under the gear lever.
- Lock the gear lever in neutral position, using tool 

[1]

.

Under the bonnet.

- Remove the air filter assembly.
- Unlock the ball-joint keys at 

«a»

.

- Place the gear selection and control levers neutral.
Lock the cable lengths with the ball-joint locking keys.

CHECKS.

- Remove the tool 

[1]

.

- Check that all the gears engage without 

« tightness »

.

- Check that the gear lever moves identically
forwards and backwards and to right and left. If it
does not, repeat the adjustment.

- Refit the trim under the gear lever.
- Refit the air filter assembly.

Adjusting the gear controls.

Engines : NFV - 6FZ - RFN - RFS - WJY - 8HZ – RHY - RHZ

XSARA - XSARA PICASSO

B2CP3C6C

B2CP3C0C

Содержание Berlingo 2003



































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды