manualshive.com logo in svg

CITROEN Berlingo 2003, Руководство пользователя

Поделиться
Скачать
CITROEN Berlingo 2003 Скачать руководство пользователя страница 274

270

CLUTCH

GEARBOX

DRIVESHAFTS

CLUTCH : CHECKS AND ADJUSTMENTS

Pull-action clutch with automatic adjustment (non-adjustable)  

RFS - RFN - RHY - RHZ

Gearbox

Engines

BE4/5

B2BP03DD

Refitting the clutch cable.

- Set the pedal to the high position (contact at 

A

).

- Attach the cable end-piece to the pedal.
- Refit a new clip

(3) 

to the pedal.

- Fit the end-piece 

(4)

to the bulkhead (

G6

Grease).

- Clip the end-piece 

(5)

to the gearbox.

- Refit the cable to the lever 

(1)

.

- Depress the clutch cable several times to set the
assembly in place.
- Check that the end-piece

(4)

is properly fitted to the

bulkhead.
- Check the operation of the automatic adjusting device.

1)

Pull the lever (in direction 

F

), the lever must move when

pulled by hand.

2)

Press the clutch pedal very lightly and repeat the same

operation. The lever should not move back.

XSARA

Содержание Berlingo 2003



































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды