CTD-N Technical Manual
page 2
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
its maximum operating depth. Do not exceed 125% of full scale when using or calibrating the in-
strument as permanent damage will occur.
Caution label on housing
CAUTION.
As with all high-pressure instrumentation, observe caution while using the CTD-N
or after exposing it to high pressures. Wear safety glasses and keep head and body clear of
the end-cap while opening.
System Configuration Requirements
TRDI software requires a Windows® compatible computer with the following specifications:
•
Windows XP® or Windows 7®
•
Pentium III 600 MHz class PC (higher recommended)
•
1GB of RAM (2GB or more RAM recommended)
•
50 MB Free Disk Space plus space for data files (A large, fast hard disk is recommended)
•
One Serial Port (two or more High Speed UART Serial Port recommended)
•
Minimum display resolution of 1024 x 768, 256 color (higher recommended)
•
CD-ROM Drive
•
Mouse or other pointing device
Pull-Down Menus
Like most programs, CTDPro uses pull-down menus, which are opened from the menu bar in the
program’s Main window by pointing to the item with the mouse pointer and clicking the left mouse
button. When the menu is open, you can select an item from it in the same manner.
In many of the procedures presented in this manual, the
➤
symbol is used to represent a sequence
of menu item selections. For example, “Choose File
➤
Open” means select File from the menu bar,
and then choose Open from File menu when it opens.
CAUTION
Contents May be
Under Pressure.
Refer to Operator’s
Manual Prior to
Servicing.
90Z-6038-00
