Networking
Port Management
Cisco SA 500 Series Security Appliances Administration Guide
86
3
•
RIP Version:
Choose one of the following options:
-
Disabled:
If RIP is disabled, this is selected.
-
RIP-1
is a class-based routing version that does not include subnet
information. This is the most commonly supported version.
-
RIP-2
includes all the functionality of RIPv1 plus it supports subnet
information. Though the data is sent in RIP-2 format for both RIP-2B and
RIP-2M, the mode in which packets are sent is different.
-
RIP-2B
broadcasts data in the entire subnet.
-
RIP-2M
sends data to multicast addresses.
STEP 3
In the
Authentication for RIP 2B/2M
area, enter the following information:
•
Enabled Authentication for RIP 2B/2M:
Check this box to enable
authentication for RIP-2B or RIP-2M.
•
First Key Parameters and Second Key Parameters
-
MD5 Key ID:
Input the unique MD-5 key ID.
-
MD5 Auth Key:
Input the auth key for this MD5 key.
-
Not Valid Before:
Start date of the First Key for MD5 based
authentication between routers.
-
Not Valid After:
End date of the First Key for MD5 based authentication
between routers.
STEP 4
Click
Apply
to save your settings, or click
Reset
to revert to the saved settings.
Port Management
You enable or disable ports, set the duplex mode and speed, and enable or
disable port mirroring. Refer to the following topics.
•
Configuring the Ports, page 87
•
Configuring SPAN (Port Mirroring), page 87
