Administration
Users
Cisco SA 500 Series Security Appliances Administration Guide
193
9
Groups
Groups are used to create a logical grouping of SSL VPN users that share the
authentication domain, LAN and service access rules, and idle timeout settings.
They are associated to authenticating domains.
STEP 1
Click
Administration
on the menu bar, and then click
Users > Groups
in the
navigation tree.
The Groups page appears.
STEP 2
To add a group, click
Add
in the List of Groups table.
NOTE
Other options:
Click the
Edit
button to edit an entry. To delete an entry, check
the box and then click
Delete
. To select all entries, check the box in the first
column of the table heading.
After you click Add or Edit, the Groups Configuration page appears.
STEP 3
Enter the following information:
•
Group Name:
Enter a unique identifier for the group. You can use any
alphanumeric characters.
•
Domain:
Assign a domain from the drop-down list of authentication
domains.
•
Idle Timeout:
Enter the number of minutes that a device can be idle before
the session is disconnected.
NOTE
The group timeout setting is used as the default timeout setting for all
users in the group. You can assign a different idle timeout setting to a
user on the Users page. The user settings have precedence over the
settings group settings. See
Adding or Editing User Settings,
page 194
.
STEP 4
Click
Apply
to save your settings, or click
Reset
to revert to the saved settings.
