44
Manually Restarting the Configuration Utility
If after installation you need to reset the configuration settings, or if you need to start the configuration
utility manually, you can issue the
service perfigo config
CLI command on either the Clean Access
Server or Clean Access Manager. When using
service perfigo config
, you will also need to enter
service perfigo reboot
or
reboot
after configuration is complete to reboot the machine.
Step 1
Connect to the CAS or CAM through direct console connection, serial connection, or SSH.
Step 2
Login as
root
with the correct password.
Step 3
Enter the
service perfigo config
command.
Step 4
Accept the default values or provide new ones for all prompts (as described in Running the
Configuration Utility, page 32).
Step 5
When configuration is done, enter
service perfigo reboot
or
reboot
to reboot the machine.
Powering Down the NAC Appliance
To power down the CAM/CAS, use one of the following recommended methods while connected via
console/SSH. These methods prevent database corruption when powering down the CAM.
•
Type
service perfigo stop
and power down the machine.
•
Type
/sbin/halt
and power down the machine.
