34
Step 7
The Clean Access Manager and Clean Access Servers in a deployment authenticate each other
through a shared secret that serves as an internal password. The default shared secret is
cisco123
. Type and confirm the shared secret (from field
f.
) at the prompts.
The shared secret used between Clean Access Manager and Clean Access Server is the
default string: cisco123
This is highly insecure. It is recommended that you choose a string that is unique
to your installation.
Please remember to configure all Clean Access Devices with the same string.
Only the first 8 characters supplied will be used.
Please enter the shared secret between Clean Access Server and Clean Access
Manager: cisco123
You entered: cisco123
Is this correct? (y/n)? [y]
Caution
The shared secret must be the same for the Clean Access Manager and all Clean Access
Servers in the deployment. If they have different shared secrets, they cannot communicate.
Step 8
Specify the time zone in which the Clean Access Manager is located (from field
g.
) as follows:
The timezone is currently not set on this system.
Please identify a location so that time zone rules can be set correctly.
Please select a continent or ocean.
a.
Choose your region from the continents and oceans list. Type the number next to your
location on the list, such as
2
for the Americas, and press Enter. Type
11
to enter the time zone
in Posix TZ format, such as
GST-10
.
b.
The next list that appears shows the countries for the region you chose. Choose your country
from the country list, such as
45
for the United States, and press Enter.
c.
If the country contains more than one time zone, the time zones for the country appears.
d.
Choose the appropriate time zone region from the list, such as
19
for Pacific Time, and press
Enter.
e.
Confirm your choices by entering
1
, or use
2
to cancel and start over.
The following information has been given:
United States
Pacific Time
Is the above information OK?
1) Yes
2) No
#? 1
Step 9
Type and confirm the current date and time, using format hh:mm:ss mm/dd/yy.
Current date and time hh:mm:ss mm/dd/yy [11:53:12 08/22/08]: 11:53:12 08/22/08
You entered 11:53:12 08/22/08 Is this correct? (y/n)? [y] y
