manualshive.com logo in svg

Cisco NAC-3300 Series, Быстрый старт

Поделиться
Скачать
Cisco NAC-3300 Series Скачать руководство пользователя страница 38

38

 

Step 3

Type the subnet mask for the interface address (from field 

b.

) at the prompt or press Enter for 

the default (255.255.255.0). Confirm the value when prompted.

Please enter the netmask for the interface eth0 []: 255.255.255.0

You entered 255.255.255.0, is this correct? (y/n)? [y]

Step 4

Accept the default gateway address or type a default gateway (from field 

c.

) for the eth0 

address of the CAS and press Enter. Confirm the default gateway at the prompt.

Please enter the IP address for the default gateway []: 10.201.240.1

You entered 10.201.240.1 Is this correct? (y/n)? [y]

Step 5

At the Vlan Id Passthrough prompt, type 

n

 and press Enter (or just press Enter) to keep VLAN 

ID passthrough disabled as the default behavior of the CAS. By default, VLAN IDs are 
stripped from traffic passing through the interface to the CAS. Typing 

y

 enables VLAN IDs to 

be passed through the CAS for traffic from the trusted to the untrusted network.

[Vlan Id Passthrough] for packets from eth0 to eth1 is disabled.

Would you like to enable it? (y/n)? [n]

Note

In most cases, VLAN passthrough is not needed. 

Step 6

At the Management VLAN Tagging prompt, type 

n

 and press Enter (or just press Enter) to 

keep Management VLAN tagging disabled (default). Or, type 

Y

 and press Enter to enable 

Management VLAN tagging with the specified VLAN ID for the eth0 interface.

[Management Vlan Tagging] for egress packets of eth0 is disabled.

Would you like to enable it? (y/n)? [n]

Note

Management VLAN tagging is necessary when the trusted side of the CAS is a trunk, such as 
in Virtual Gateway deployments. In this case, you will need to enable Management VLAN 
tagging and specify the VLAN ID to which the trusted interface of the CAS belongs.

Note

CAS eth0 interface settings are required for basic connection to the CAM. CAS eth1 interface 
settings can be reconfigured later from the CAM web console.

Step 7

Type an IP address for the eth1 (untrusted) interface of the CAS (from field 

d.

) and press Enter. 

Confirm the value when prompted, or type 

n

 and press Enter to correct the entry. 

Please enter the IP address for the untrusted interface eth1 []: 10.10.10.10

You entered 10.10.10.10 Is this correct? (y/n)? [y]

Содержание NAC-3300 Series

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды