33
Run CAM Configuration Utility Script
Step 1
After the software is installed from the CD and package installation is complete, the welcome
script for the configuration utility appears
:
Welcome to the Cisco Clean Access Manager quick configuration utility.
Note that you need to be root to execute this utility.
The utility will now ask you a series of configuration questions.
Please answer them carefully.
Cisco Clean Access Manager, (C) 2008 Cisco Systems, Inc.
Note
If this prompt does not appear after you install the Cisco NAC Appliance software and restart
the CAM, refer to Manually Restarting the Configuration Utility, page 44.
Step 2
When prompted, type an IP address for the eth0 (trusted) interface of the CAM (from field
a.
of the CAM Worksheet) and press Enter. Confirm the value when prompted, or type
n
and
press Enter to correct the entry.
Configuring the network interface:
Please enter the IP address for the interface eth0 []: 10.201.240.11
You entered 10.201.240.11 Is this correct? (y/n)? [y]
Step 3
Type the subnet mask for the interface address (from field
b.
) at the prompt or press Enter for
the default (255.255.255.0). Confirm the value when prompted.
Please enter the netmask for the interface eth0 []: 255.255.255.0
You entered 255.255.255.0, is this correct? (y/n)? [y]
Step 4
Accept the default gateway or specify and confirm a default gateway address (from field
c.
)
for the Clean Access Manager. This is typically the IP address of the router between the CAM
subnet and the CAS subnet.
Please enter the IP address for the default gateway []: 10.201.240.1
You entered 10.201.240.1. Is this correct? (y/n)? [y]
Step 5
Type a host name for the Clean Access Manager (from field
d.
) To use the CAM host name
for the CAM web console, make sure to create an entry in your DNS server.
The default host
name is
nacmanager
.
Please enter the hostname [nacmanager]: cam3350
You entered cam3350 Is this correct? (y/n)? [y]
Step 6
Type the IP address of the Domain Name System (DNS) server in your environment (from field
e.
) or accept the default at the following prompt:
Please enter the IP addresses for the name servers: []: 63.93.96.94
You entered 63.93.96.94 Is this correct? (y/n)? [y]
