23
Clean Access Server (CAS) Configuration Worksheet
1. eth0 and eth1 generally correlate to the first two network cards—NIC 1 and NIC 2—on most types of server
hardware.
2. Cisco highly recommends replacing default password(s) with “strong” passwords (at least 8 characters long,
comprised of a combination of two characters from each of the upper- and lower-case letters, numbers, and special
characters categories)
Table 3
CAS Configuration Utility Worksheet
For Clean Access Server NAC Appliance
a.
IP address for eth0 interface (trusted)
1
:
1. eth0 and eth1 generally correlate to the first two network cards—NIC 1 and NIC 2—on most types of server
hardware.
b.
Subnet mask (IP netmask) for eth0 interface:
c.
Default gateway IP address for eth0 interface:
d.
IP address for eth1 interface (untrusted):
e.
Subnet mask (IP netmask) for eth1 interface:
f.
Default gateway IP address for eth1 interface
1
:
g.
Host name for your CAS:
h.
IP address of Domain Name Server on your network:
i.
Shared secret:
Must be the same for the CAM and all CASs
j.
Date, time and timezone:
k.
To generate the required temporary SSL certificate
(you can change this at a later time):
FQDN or eth0 IP address of CAS:
Organization unit (e.g. Sales)
Organization name (e.g. Cisco)
Organization location (e.g. San Jose, CA, US)
Note
If using FQDN, make sure your DNS server
is set up for the domain name.
l.
Root user password
2
:
m.
Web console password
2
:
