Cisco MCS-7825-H3-IPC1, Руководство по обслуживанию

Страница: 823 / 974

8-19
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 8 Industry-Standard Management Information Base
SYSAPPL-MIB
SYNTAX Unsigned32 (1...ffffffffh)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Part of the index for this table, this value identifies the invocation of an application of which the
process represented by this entry was a part. The value of this object is the same value as the
sysApplRunIndex for the corresponding application invocation in the sysApplRunTable. If the
invoked application as a whole has terminated, it will be the same as the sysApplPastRunIndex.
::= { sysApplElmtPastRunEntry 1 }
sysApplElmtPastRunIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..'ffffffff'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Part of the index for this table. An integer assigned by the agent equal to the corresponding
sysApplElmtRunIndex which was removed from the sysApplElmtRunTable and moved to this table
when the element terminated. Note that entries in this table are indexed by
sysApplElmtPastRunInvocID, sysApplElmtPastRunIndex.
The possibility exists, though unlikely, of a collision occurring by a new entry which was run by the
same invoked application (InvocID), and was assigned the same process identification number
(ElmtRunIndex) as an element which was previously run by the same invoked application.
Should this situation occur, the new entry replaces the old entry.
See the Implementation Issues section, sysApplElmtPastRunTable Entry Collisions for the
conditions that would have to occur in order for a collision to occur.
::= { sysApplElmtPastRunEntry 2 }
sysApplElmtPastRunInstallID OBJECT-TYPE
SYNTAX Unsigned32 (1..'ffffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The index into the installed element table. The value of this object is the same value as the
sysApplInstallElmtIndex for the application element of which this entry represents a previously
executed process.
::= { sysApplElmtPastRunEntry 3 }
sysApplElmtPastRunTimeStarted OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The time the process was started.
::= { sysApplElmtPastRunEntry 4 }