Cisco MCS-7825-H3-IPC1, Руководство по обслуживанию

Страница: 92 / 974

2-50
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 2 New and Changed Information
Cisco Unified Communications Manager, Release 8.0(1)
The following contains the Performance Object for Cisco IME Server:
VAPStatus (range from 0 to 2)—This flag indicates the overall health of the connection to the IME
servers for a particular IME service. If 1, it means that Unified CM has successfully established a
connection to its primary and, if configured, backup servers for the IME service. 2 = Unhealthy.
0 = Unknown.
• The following contains the Performance Counters for Cisco IME Server. Table 2-10 contains
information about the Performance Counters for Cisco IME Server.
For more information, see the Cisco Unified Real-Time Monitoring Tool Administration Guide .
Table 2-10 Cisco IME Server
Counters Counter Description
PublishedRoutes Total number of DIDs published successfully into the DHT across all
IME services. It is a dynamic measurement, and as such, gives you an
indication of your own provisioned usage in addition to a sense of how
successful the system has been in storing them into the network.
RejectedRoutes Number of learned routes which were rejected because the number or
domain were blacklisted by the administrator. This provides an indica-
tion of the number of 'missed opportunities' - cases where a VoIP call
could happen in the future, but will not due to the blocked validation.
LearnedRoutes Total number of distinct phone numbers which have been learned by
IME and are present as routes in Unified CM's routing tables. If this
number grows too large, it may exceed the per-cluster limit, and require
additional clusters for scale.
UniqueDomains Number of unique domain names of peer enterprises discovered by
IME. It is an indicator of overall usage of the system.
FailedB2BLinkSetups Total number of call attempts for which a IME route was available, but
which were set up through the PSTN due to a failure to connect to the
target over the IP network.
B2BLinkCallsAttempted Number of calls initiated by UCM through IME. This includes calls
that are accepted, as well as busy, no-answer and failed calls. The
metric is strictly on initiation.
B2BLinkCallsSetup Number of IME calls successfully placed by Unified CM and answered
by the remote party, resulting in an IP call.
FailedFallbackCalls Total number of failed fallback attempts.
e164 DIDs Learned Number of DIDs learned from the IME server.
B2BLinkCallsAccepted Number of IME calls successfully received by UCM and answered by
the called party, resulting in an IP call.
B2BLinkCallsReceived Number of calls received by Unified CM through IME. This includes
calls that are accepted, as well as busy, no-answer and failed calls. The
metric is strictly on initiation.