Cisco MCS-7825-H3-IPC1, Руководство по обслуживанию

Страница: 916 / 974

8-112
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 8 Industry-Standard Management Information Base
IF-MIB
STATUS current
DESCRIPTION
The current operational state of the interface. The testing(3) state indicates that no operational
packets can be passed. If ifAdminStatus is down(2) then ifOperStatus should be down(2). If
ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready
to transmit and receive network traffic; it should change to dormant(5) if the interface is waiting for
external actions (such as a serial line waiting for an incoming connection); it should remain in the
down(2) state if and only if there is a fault that prevents it from going to the up(1) state; it should
remain in the notPresent(6) state if the interface has missing (typically, hardware) components.
::= {ifEntry 8}
ifLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The value of sysUpTime at the time the interface entered its current operational state. If the current
state was entered prior to the last re-initialization of the local network management subsystem, then
this object contains a zero value.
::= {ifEntry 9}
ifInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The total number of octets received on the interface, including framing characters. Discontinuities
in the value of this counter can occur at re-initialization of the management system, and at other
times as indicated by the value of ifCounterDiscontinuityTime.
::= { ifEntry 10 }
ifInUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed
to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can
occur at re-initialization of the management system, and at other times as indicated by the value of
ifCounterDiscontinuityTime.
::= { ifEntry 11 }
ifInNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only