Cisco MCS-7825-H3-IPC1, Руководство по обслуживанию

Страница: 924 / 974

8-120
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 8 Industry-Standard Management Information Base
IF-MIB
The total number of packets that higher-level protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.
This object is a 64-bit version of ifOutBroadcastPkts.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime.
::= { ifXEntry 13 }
ifLinkUpDownTrapEnable OBJECT-TYPE
SYNTAX Integer { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this
object should have the value enabled(1) for interfaces which do not operate on 'top' of any other
interface (as defined in the ifStackTable), and disabled(2) otherwise.
::= { ifXEntry 14 }
ifHighSpeed OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object
reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to
`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate
estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which
has no concept of bandwidth, this object should be zero.
::= { ifXEntry 15 }
ifPromiscuousMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
This object has a value of false(2) if this interface only accepts packets/frames that are addressed to
this station. This object has a value of true(1) when the station accepts all packets/frames transmitted
on the media. The value true(1) is only legal on certain types of media. If legal, setting this object
to a value of true(1) may require the interface to be reset before becoming effective.
The value of ifPromiscuousMode does not affect the reception of broadcast and multicast
packets/frames by the interface.
::= { ifXEntry 16 }
ifConnectorPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only