Cisco MCS-7825-H3-IPC1, Руководство по обслуживанию

Страница: 852 / 974

8-48
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 8 Industry-Standard Management Information Base
RFC1213-MIB (MIB-II)
ACCESS read-write
STATUS mandatory
DESCRIPTION
The number of seconds since this route was last updated or otherwise determined to be correct. Note
that no semantics of too old can be implied except through knowledge of the routing protocol by
which the route was learned.
::= { ipRouteEntry 10 }
ipRouteMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
Indicate the mask to be logical-ANDed with the destination address before being compared to the
value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an
agent constructs the value of the ipRouteMask by determining whether the value of the
correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask
network 255.0.0.0 class-A, 255.255.0.0 class-B, 255.255.255.0 class-C. If the value of the
ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that
all IP routing subsystems implicitly use this mechanism.
::= { ipRouteEntry 11 }
ipRouteMetric5 OBJECT-TYPE
SYNTAX Integer
ACCESS read-write
STATUS mandatory
DESCRIPTION
An alternate routing metric for this route. The semantics of this metric are determined by the
routing-protocol specified in the route ipRouteProto value. If this metric is not used, its value should
be set to -1.
::= { ipRouteEntry 12 }
ipRouteInfo OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
A reference to MIB definitions specific to the particular routing protocol which is responsible for
this route, as determined by the value specified in the route ipRouteProto value. If this information
is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically
valid object identifier, and any conformant implementation of ASN.1 and BER must be able to
generate and recognize this value.
::= { ipRouteEntry 13 }