A-6
Installation and Upgrade Guide for Cisco Unified Presence Release 8.0 and 8.5
Appendix A Installation Readiness Checklist and Settings
Field Definitions: Installation Readiness Checklist
Table 2
describes the fields listed in the Installation Readiness checklist in more detail
Table 2
Field Definitions
Field
Description
Usage
Administrator Login
Specifies the name that you want
to assign to the Administrator
account.
Ensure the name is unique; it can
contain lowercase, alphanumeric
characters, hyphens, and
underscores. It must start with a
lowercase, alphanumeric character.
You should record this mandatory
field value for use when signing in to
the CLI on the platform or into the
Cisco Unified Communications
Operating System Administration.
Note
You cannot change this field
after installation.
Administrator Password
Specifies the password for the
Administrator account.
Use this password to sign in to
Cisco Unified Communications
Operating System Administration,
Disaster Recovery System, and the
CLI.
Application User Username
and Password
Specifies the user ID and
password for Cisco Unified
Presence administration.
Use this user ID and password to sign
in to the Cisco Unified Presence
administration interface.
DHCP
Dynamic Host Configuration
Protocol
Select
Yes
if you want to use DHCP
to automatically configure the
network settings on your server.
If you select
No
, you must enter a
hostname, IP Address, IP Mask,
Gateway, and DNS configuration.
DNS Enabled
A Domain Name System (DNS)
server represents a device that
resolves a hostname into an IP
address or an IP address into a
hostname.
The DNS fields only display
when you are not using DHCP.
If you do not have a DNS server,
enter
No
. When DNS is not enabled,
you should only enter IP addresses
(not hostnames) for all network
devices in your Cisco IP Telephony
network.
If you have a DNS server, we
recommend that you enter
Yes
to
enable DNS. Disabling DNS limits
the ability of the system to resolve
some domain names.