4-8
Chapter 4 Completing Cisco Unified Presence Installation Setup on the Publisher and Subsequent Servers
Post-Installation Checklist
Troubleshooting Tips
You must wait until the Cisco Unified Presence Sync Agent is active before you can use the
Cisco Unified Presence server.
Related Topics
•
See the
Deployment Guide for Cisco Unified Presence
for information about Cisco Unified Presence
licensing modes.
•
For information on the RTMT tool, see the
Serviceability Configuration and Maintenance Guide for
Cisco Unified Presence
at this URL:
http://www.cisco.com/en/US/products/ps6837/prod_maintenance_guides_list.html
Configure the backup settings.
Remember to back up Cisco Unified Presence
daily.
You must have access to a Secure File Transfer
Protocol (SFTP) server to back up Cisco Unified
Presence over a network.
Verify the cluster ID.
If you are deploying multiple Cisco Unified Presence
clusters, each cluster must have a unique cluster ID
value. Cisco Unified Presence uses the cluster ID value
to identify the source cluster of alert notifications sent
by the RTMT tool.
At installation, the system assigns a unique cluster ID
to the Cisco Unified Presence publisher node. The
systems distributes the cluster ID so that all nodes in
your cluster share the same cluster ID value.
Select
Cisco Unified Presence Administration >
Presence > Settings
to view or configure the cluster
ID.
Post-Installation Tasks
Important Notes
